Text archives Help
- From: Nathan Jeffery <njeffery@liverpool.ac.uk>
- To: seg3d@sci.utah.edu
- Subject: [Seg3D] Re: Re: Seg3D & CUBIT
- Date: Tue, 19 Jul 2011 12:34:25 +0100
thanks Shawn,
does that cope with multiple materials? trying to build mesh of knee
joint with bone and cartilage in the geometry.
n
On 19/07/2011 12:32, shawn@math.auckland.ac.nz wrote:
Hiya,
I use slicer3D (http://www.slicer.org/) to import the nrrd file,
create a surface from that, then output to a .stl file cubit can read.
takes some fiddling to get it so cubit is happy, but it works for me so far...
hope this helps!
---
shawn
shawn@math.auckland.ac.nz
--
----------------------------------------------------------
Dr. Nathan Jeffery
Department of Musculoskeletal Biology
Institute of Ageing& Chronic Disease
University of Liverpool
Sherrington Bld.
Ashton Street
Liverpool L69 3GE
Office: 0151 794 5514
Fax: 0151 794 5517
e-mail: njeffery@liv.ac.uk
http://pcwww.liverpool.ac.uk/~njeffery/
-------------------------------------------------------
Archive powered by MHonArc 2.6.16.