Zoom: mouse right click and draw while shift key down. Jinkoo From: Hugues Fontenelle [mailto:hugues.fontenelle@rr-research.no] Hi Paula Contrast/Intensity: left-click in the image and drag horizontally/vertically. Zoom: I’m not sure about zooming, but you can always set Autoview ON (the four arrows button below the image) in order to fit the image to the screen, or use full screen (CTRL-F), or use one viewer (ALT-0). Hope it helps Hugues From: Vickerton, Paula [mailto:P.Vickerton@student.liverpool.ac.uk] From: Vickerton, Paula I am currently using Seg3D and wondered if there is a way in which I can alter the contrast of my image whilst in the programme? ============================================================================== CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies. Note to Patients: There are a number of risks you should consider before using e-mail to communicate with us. See our Privacy Policy and Henry Ford My Health at www.henryford.com for more detailed information. If you do not believe that our policy gives you the privacy and security protection you need, do not send e-mail or Internet communications to us. ============================================================================== |
Archive powered by MHonArc 2.6.16.