SCIRun User Mailing List

Text archives Help

Re: [SCIRUN-USERS] [SCIRUN-DEVELOP] [Webmaster] Contact CIBC Submission

Chronological Thread 
  • From: Ayla Khan <>
  • To: Gowry Balasena <>
  • Cc: Jess Tate <>, Rob MacLeod <>, scirun-users List <>, Elizabeth Jurrus <>
  • Subject: Re: [SCIRUN-USERS] [SCIRUN-DEVELOP] [Webmaster] Contact CIBC Submission
  • Date: Fri, 20 Mar 2015 14:34:43 -0600

Hi Gowry,

Unfortunately, SCIRun does not run well on Intel integrated graphics hardware. You can find information about SCIRun graphics hardware support on the SCIRun website ( under the Specifications tab.


On Mar 20, 2015, at 12:44 AM, Gowry Balasena wrote:

Hi Ayla,

Thank you for the quick response.Intel(R) HD graphics Family and windows 7 is the graphic card and os I am using currently.I am doing my master studies under the project titled "Current Distribution Modelling in Tissues Using Finite Element Analysis". I have to develop a realistic breast model  and then conduct FEA on it to see the feasibility of electrical bio-impedance technique in detecting breast cancer.

Do you have any suggestion on which software to use to both develop the realistic 3D model of the breast and to run electrical current simulation on it for finite element analysis(fea)? I've managed to get the 3D realistic breast phantom using the voxel data available online at . Is it possible to do it in the SCIRun/Biopse platform? On the same note, I'd be happy to directly contact you to clear my doubts if you could provide me your contact number.

Thank you once again and hope to hear from you soon .

On Fri, Mar 20, 2015 at 4:28 AM, Jess Tate <> wrote:
As far as I can tell, the BioFEM powerapp computed a dipole forward simulation.  There is a network in the BioPSE examples that does that in the source code:
It doesn't do streamlines, and I'm not sure what else the powerapp did, but I'm sure the simulation is the same.


On Mar 19, 2015, at 12:55 PM, Rob MacLeod wrote:

Hi Folks,

What is the name of the network that simulates the same behavior as the old powerapp BioFEM?  


On Mar 19, 2015, at 12:13 PM, Ayla Khan <> wrote:

Hi Gowry,

We no longer support BioFEM. To address the SCIRun window disappearing problem, could you please tell me what operating system you're running and what graphics card you're using.



On Mar 19, 2015, at 7:45 AM, Nathan Galli wrote:

This came through the webmaster mailing list. Just forwarding it along.

From: SCI Webmaster <>
Sent: March 19, 2015 5:07:46 AM MDT
Subject: [Webmaster] Contact CIBC Submission

gowry <>


Re Software: SCIRun

Subject: BioFEM, Biomesh launching problem

Message: Hi,
I'm Gowry here and I would like to know on how to launch the BioFEM power package in the SCIRun as I cannot find BioFEM which is an executable file in the scirun 4.7 I recently downloaded. Apart from that, the scirun window screen always disappears all of a sudden.

Thank you so much and hope to hear from you soon!

Archive powered by MHonArc 2.6.18.

Top of page